Four Steps to an Ultimate Bubble Gun Experience – Love By Letterbox

Four Steps to an Ultimate Bubble Gun Experience

Getting started with your new Bubble Gun is super easy - you can get the kids to read this.

Step One

Take off the cover on the underside of the Bubble Gun and take note of the orientation of the positive and negative terminals, for when you place in your batteries.

Unless your Bubble Gun arrived with batteries. Get three, new, 1.5v AA batteries - using old/used batteries will not allow the blast motor to reach its maximum performance capability.

Insert the batteries into the battery compartment we looked at earlier - making sure the batteries are the correct way around.

Place the cover back on (please do not worry if you have a missing screw. This is not needed and will still work).

 

Step Two

Briefly press the trigger button.

The fan should have fired up - ready for action.

If not, and your Bubble Gun arrived with batteries, make sure there is nothing breaking the circuit. Alternatively, you may want to watch our linked video here or contact us.

 

Step Three

 

Please use the included Bubble Solution or order more from our Bubble Gun product page.

You can use soap and water. But if you do, make sure to use soft or distilled water as this will have a major impact on how many bubbles are produced.

 

Step Three Continued...

Pour your ready made bubble solution into the included pot that came with your Bubble Gun. Fill up to half way.

 

Step Four

Dip the end of the barrel into the pot you just pored the bubble solution into.

Then holding it horizontally (to begin with), press the trigger button.

Bubbles should now be firing out rapidly!

Leave a comment

Please note, comments must be approved before they are published

Liquid error: Could not find asset snippets/sumo.liquid